Quickly estimate rods, total weight, and cost for column bars and footing mesh.
Std bar length: 12 m
Values are approximate. Always confirm with your structural engineer.
| Diameter | kg/m | kg/bar | Rate (₹) |
|---|---|---|---|
| 8 mm | 0.395 | 4.74 | |
| 10 mm | 0.617 | 7.40 | |
| 12 mm | 0.888 | 10.66 | |
| 16 mm | 1.580 | 18.96 |
Vertical bars running through the column height (above + below surface).
1 footing per column
Mesh steel under each column. You can set footing size and number of rods in X & Y direction.
≈ {{ footingLengthM }} m
≈ {{ footingWidthM }} m
X rods run along width (length of each rod = footing width).
Y rods run along length (length of each rod = footing length).
Bars required (12 m)
{{ results.barsColumn }}
{{ columnRodsInfo }}
Total length
{{ format(results.totalLengthColumnM, 2) }} m
{{ format(results.totalLengthColumnFt, 2) }} ft
Total weight
{{ format(results.weightColumnKg, 1) }} kg
{{ format(results.weightColumnTon, 3) }} tons
Column steel cost
₹{{ format(results.costColumn, 0) }}
₹{{ format(results.costColumnPerPillar, 0) }} per column
Bars required (12 m)
{{ results.barsFooting }}
{{ footingMeshInfo }}
Total length
{{ format(results.totalLengthFootingM, 2) }} m
{{ format(results.totalLengthFootingFt, 2) }} ft
Total weight
{{ format(results.weightFootingKg, 1) }} kg
{{ format(results.weightFootingTon, 3) }} tons
Footing steel cost
₹{{ format(results.costFooting, 0) }}
₹{{ format(results.costFootingPerPillar, 0) }} per footing
Total weight (column + footing)
{{ format(grandWeight, 1) }} kg ({{ format(grandWeight / 1000, 3) }} tons)
Total cost
₹{{ format(grandCost, 0) }}
⚠️ This calculator ignores hooks, bends, laps, and wastage margins. Use it only for rough planning.
{{ converterWeightPerBar }} kg/bar
= {{ converterPiecesToKg }} kg
= {{ converterKgToPieces }} pcs
₹{{ converterCost }}